Rp2350a Weact
Firmware development for the WeAct Studio RP2350A Core Board (RP2350A — dual Cortex-M33 @ 150 MHz, 520 KB SRAM, 4 MB or 16 MB QSPI flash) in both of its revisions, RP2350A_V10 and RP2350A_V20 — the 40-pin Pico-2-shaped header, 3-or-4-channel 12-bit ADC, PWM, PIO, USB-C CDC, the V1.0 LDO vs V2.0 buck-boost power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, a WeAct RP2350 core board of unknown revision, or any Raspberry Pi Pico 2 / RP2350A clone: project setup, platformio.ini, board = rpipico2 vs weact_rp2350b, telling V1.0 and V2.0 apart, pin mapping, LED and KEY pins, powering it from a battery, 4 MB vs 16 MB flash, erratum RP2350-E9 pull-down trouble, BOOT/RESET UF2 flashing, or debugging why something on the board does not work.
Security AStatic scan found no risk patternsHow grading works ›
From the source SKILL.md
A Pico-2-shaped RP2350A core board that ships in two incompatible revisions under one name. V2.0 is a pin-for-pin Pico 2 replacement; V1.0 brings out every GPIO instead, and pays for it by moving the power pin, the ADC reference and three GPIO functions. Firmware built for the wrong one compiles cleanly and then drives the wrong pins — so establish the revision before writing any code, and read the reference files rather than assuming Pico 2 behaviour.
What this skill does
Rp2350a Weact is a community-contributed Claude Code skill in the engineering-misc sub-category. It ships as a SKILL.md file that Claude Code auto-discovers under ~/.claude/skills/rp2350a-weact/ and loads when your prompt matches the skill's trigger.
When to invoke it: Use when working on this board, a WeAct RP2350 core board of unknown revision, or any Raspberry Pi Pico 2 / RP2350A clone: project setup, platformio.ini, board = rpipico2 vs weact_rp2350b, telling V1.
Who uses this skill
The Rp2350a Weact Claude Code skill is built for software engineers, backend developers, full-stack teams, and technical leads building and maintaining production systems. It's part of ClaudSkills (also referred to as Claude Skills or Claude Code Skills) — the open community-curated registry of 211,000+ SKILL.md files for Anthropic's Claude Code agent and the wider Claude ecosystem (Claude API, Claude Agent SDK).
How to install
Free
Manual install (2 steps)
mkdir -p ~/.claude/skills/rp2350a-weact
curl -L https://claudskills.com/skills/rp2350a-weact/SKILL.md \
-o ~/.claude/skills/rp2350a-weact/SKILL.md
Or just download SKILL.md directly and drop it into ~/.claude/skills/rp2350a-weact/. Claude Code auto-discovers it on next session.
Skills live at ~/.claude/skills/rp2350a-weact/SKILL.md on macOS/Linux, or %USERPROFILE%\.claude\skills\rp2350a-weact\SKILL.md on Windows. See the full install guide for step-by-step instructions.
Telegram
📱 Install from your phone or desktop Telegram
Open @claudskills_bot on Telegram, tap Open Desktop App, and the desktop app installs this skill for you. Or share the bot link with a colleague — they get the same one-tap install. Learn more →
Pro
One-click install via the desktop app
The ClaudSkills desktop app installs any skill directly into ~/.claude/skills/ with one click — no terminal required. Pro starts at $9/mo or $149 lifetime.
Pro
For the full experience including quality scoring and one-click install features for each skill — upgrade to Pro.
Frequently asked questions
How do I install the Rp2350a Weact Claude Code skill?
Install via the ClaudSkills desktop app (one click) or copy
SKILL.md from the source repository to
~/.claude/skills/rp2350a-weact/SKILL.md and restart Claude Code. Both flows are detailed at
claudskills.com/install/.
What does the Rp2350a Weact skill do?
Firmware development for the WeAct Studio RP2350A Core Board (RP2350A — dual Cortex-M33 @ 150 MHz, 520 KB SRAM, 4 MB or 16 MB QSPI flash) in both of its revisions, RP2350A_V10 and RP2350A_V20 — the 40-pin Pico-2-shaped header, 3-or-4-channel 12-bit ADC, PWM, PIO, USB-C CDC, the V1.0 LDO vs V2.0 buck-boost power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, a WeAct RP2350 core board of unknown revision, or any Raspberry Pi Pico 2 / RP2350A clone: project setup, platformio.ini, board = rpipico2 vs weact_rp2350b, telling V1.0 and V2.0 apart, pin mapping, LED and KEY pins, powering it from a battery, 4 MB vs 16 MB flash, erratum RP2350-E9 pull-down trouble, BOOT/RESET UF2 flashing, or debugging why something on the board does not work.
Is this skill free to install?
Yes. ClaudSkills is an open registry — every skill keeps its source repository's license, and manual install via copy is free. ClaudSkills Pro ($9/mo, $79/yr, or $149 one-time) adds one-click install via the desktop app and a multi-signal Quality Score.
When should I use the Rp2350a Weact skill?
Use Rp2350a Weact when your Claude Code task falls under the Engineering category — specifically in the engineering misc area. Claude Code auto-discovers installed skills and invokes the right one based on the task description, so you can also ask Claude directly (e.g. "use Rp2350a Weact" or describe the task and let Claude pick). Browse related skills at
/category/engineering/.
What is a Claude Code skill and how does the Rp2350a Weact skill fit in?
A Claude Code skill is a
SKILL.md file that lives under
~/.claude/skills/<name>/ and tells the Claude Code CLI agent how to perform a specific task (instructions, prompts, allowed tools). Skills are auto-discovered at session start. Rp2350a Weact is one of 67,000+ skills indexed in the open ClaudSkills catalog, classified under the Engineering category. Learn more at
/learn/what-is-a-claude-skill/.
Attribution & license
Cite this skill
If you reference this skill in a blog post, paper, or documentation, you can cite it as:
APA
alexex1993. (2026). Rp2350a Weact [Claude Code skill]. ClaudSkills. https://claudskills.com/skills/rp2350a-weact/
BibTeX
@misc{rp2350a-weact-2026,
author = {alexex1993},
title = {Rp2350a Weact [Claude Code skill]},
year = {2026},
publisher = {ClaudSkills},
url = {https://claudskills.com/skills/rp2350a-weact/}
}
Embed this skill
Promote, attribute, or link this skill from your own README, blog post, or documentation. All three snippets are free to use — no sign-up, no API key. More distribution surfaces →
Badge
[](https://claudskills.com/skills/rp2350a-weact/?utm_source=badge&utm_medium=readme&utm_campaign=skill_badge)
<script>
<script src="https://claudskills.com/embed/rp2350a-weact.js" async></script>
<iframe>
<iframe src="https://claudskills.com/embed/rp2350a-weact.html" width="100%" height="160" frameborder="0" loading="lazy" title="ClaudSkills: Rp2350a Weact"></iframe>
Security scan
Grade A · scanned 2026-10-25 — free static scan against the OWASP Agentic Skills Top 10.
No risk patterns were found in any of the ten OWASP-aligned categories. How grading works ›
- ✓ Prompt injection
- ✓ Data exfiltration
- ✓ Supply chain
- ✓ Reverse shell
- ✓ Credentials
- ✓ Execution
- ✓ Filesystem
- ✓ Persistence
- ✓ Obfuscation
- ✓ Network
Show this grade on your repo (click to copy):
[](https://claudskills.com/skills/rp2350a-weact/#security)
More Engineering skills
Browse all Engineering skills in the ClaudSkills registry, or explore these other picks from the same category:
Part of Acreator Store — Adam Lankamer's AI tools:
PerfectStudio ·
Ucaption ·
UTagger ·
AutoXPoster ·
TestYourSkills ·
AutomationFlows ·
Au Naturel ·
Telegram @acreatorstore